Start by checking server details, file format, and transfer method. The difference between SFTP and FTP is that you need a key from the provider for SFTP.

1. Verify that QuickPost uses the correct server address, port, file format, and target directory.
2. For SFTP, the server's fingerprint or host key must be verified before the transfer works. Go to the security tab and enter the fingerprint from the SFTP server provider.
3. Run a manual export and check the List file, Result files, and QuickPost log.
4. If the export still fails, check DNS, internet access, firewall, and any proxy.
5. Good to keep in mind: Always verify the receiving server, file format, scheduling, and log results after a test run before putting the export into production. Also, feel free to verify the List Files and log after a test run to see if the file was created, moved, and actually sent without error codes.

2. För SFTP ska serverns fingerprint eller host key vara verifierad innan överföring fungerar. Gå till fliken security och skriv in fingerprint från leverantören av SFTP servern.

3. Kör en manuell export och kontrollera List file, Result files och QuickPost-loggen.

4. Om exporten ändå misslyckas, kontrollera DNS, internetåtkomst, brandvägg och eventuell proxy.

Bra att tänka på: Verifiera alltid mottagande server, filformat, tidsstyrning och loggutfall efter en testkörning innan exporten tas i drift skarpt. Verifiera gärna också List Files och loggen efter en testkörning, så att du ser om filen skapades, flyttades och faktiskt skickades utan felkod.

QuickPost is used to send files via FTP, SFTP, or HTTP/HTTPS depending on the chosen method. Use the QuickPost wizard to set up the correct settings.

1. Enter server, port, login, file format, and target directory in QuickPost.

2. For SFTP, the server's fingerprint must be verified under Security before the transfer works.

3. Check the result in List file and that the files appear under Result files → Stored files after a successful upload.

4. Upload time is specified in UTC, and if Upload period is 0, one upload per day is used at the specified time.

Good to keep in mind: Always verify the receiving server, file format, scheduling, and log output after a test run before putting the export into production. For the 900 series, you should also verify the file format, server address, and – for SFTP – host key or fingerprint before considering the export stable.